24 April 2019 Tomato Trellis

Discussion in 'Fruit and Vegetable Gardening' started by Durgan, Apr 24, 2019.

  1. Durgan

    Durgan Contributor 10 Years

    Messages:
    2,669
    Likes Received:
    100
    Location:
    Brantford,Ontario, Canada
    24 April 2019 Tomato Trellis
    Posted on April 24, 2019 by Durgan
    24 April 2019 Tomato Trellis24 April 2019 Tomato Trellis
    An overhead trellis was made for 21 tomato plants.The trellis is made from fence posts and rebar and are tied together with plastic ties. The vines are supported by strings tied to the overhead trellis. The plants are allowed to free grow and supported when required. The bed is 8 feet wide and 24 feet long. Each plant has space of about 4 plus square feet. Production is from 300 to 500 pounds depending a great deal upon the weather.
    dsc_0082_std.jpg
     
  2. Michigander

    Michigander Active Member

    Messages:
    238
    Likes Received:
    50
    Location:
    Detroit, Michigan, USA
    2018_1227IceStrom0211190004.JPG Chainlink fence is also pretty good, too. These two former 6 ft x 4 ft driveway gates are stood on end between two permanent posts, tied together and to the posts with electrical zip ties. There are three beds with anti-rabbit fences and permanent posts that the fence sections are rotated among each year. Anything that climbs does well, especially tomatoes and cukes that can be just poked through, back-and-forth as it grows up.
     
    Pocoveggie likes this.
  3. Durgan

    Durgan Contributor 10 Years

    Messages:
    2,669
    Likes Received:
    100
    Location:
    Brantford,Ontario, Canada
    Holes are too small. Good rabbit fence though.











    h
     
  4. Michigander

    Michigander Active Member

    Messages:
    238
    Likes Received:
    50
    Location:
    Detroit, Michigan, USA
    Not so. Why too small? I have never had a tomato vine too thick to stick through the fence. Just stick a tip through one side then back though the other way. Peas, cukes & tomatoes work perfectly.
     
    Last edited by a moderator: May 2, 2019

Share This Page